Control Systems#

A connector is OSPREY’s single interface to a control system. The agent, the plans and the safety layers are all written against that one interface, so the machine underneath it is interchangeable. Use the simulator in process for development, the simulator served from its container for rehearsal, and the real hardware for production.

Use Connectors

The two-layer connector abstraction, the connectors that ship in-tree, and where to register your own. Moving from simulator to production changes control_system.type, not code.

Use Connectors
Use the Connectors Without the Framework

Read a control system and its archiver from a script of your own with pip install osprey-connectors alone – no agent, no built deployment.

Use the Connectors Without the Framework
Use the Virtual Accelerator

Run against a containerized simulator serving real EPICS Channel Access, with PyAT physics behind the storage-ring lattice channels, so correctors move and BPMs respond.

Use the Virtual Accelerator
Switch the Control Target at Run Time

Rehearse a piece of work on the simulator, then run the same work on the live machine without rebuilding the project or restarting anything.

Switch the Control Target at Run Time
Connect the Agent to Phoebus Displays

Let the agent open, read and drive live Phoebus displays through the agent bridge.

Connect the Agent to Phoebus Displays
Review the Agent’s Code

Have a model read the Python the agent writes for what it would do to the machine, under rules you write, before it runs.

Review the Agent’s Code